How to paint an exterior house.

image-234x300

How to paint an exterior house

Heres how!

Materials Needed:

exterior flat or satin sheen paint
exterior semigloss paint
pressure washer
paint sprayer
paintbrush
painter’s tape
drop cloths
ladder
paint scraper
stain-blocking primer
epoxy filler
medium-grit sanding block
spackle knife
exterior caulk
caulk gun
plastic sheeting
patience

Step 1: Pressure-Wash Exterior body and trim
To ensure best coverage, remove dirt and dust buildup from house using a pressure washer. TIP: Work your way from top to bottom of house in a smooth, controlled manner, overlapping each stroke by 8 inches.

Step 2: Repair Damaged Surfaces
Walk around entire perimeter of house taking note of damaged surfaces such as: wood, masonry, metal, siding or stucco. Apply epoxy filler to cracks or holes using spackle knife. Once dry, lightly sand using medium-grit sanding block.

Step 3: Remove Loose Paint
Once exterior is dry, walk around perimeter of house taking note of any loose or chipped paint. Place drop cloths along ground, then remove chipped and loose paint using paint scraper or medium-grit sanding block.

Step 4: Caulk Trim
Fill any gaps between house and trim around doors and windows using exterior caulk and caulk gun. If house has mixed materials such as siding and brick, add caulk along surface where different materials meet.

Step 5: Prime Stains
Examine exterior for any stains or visible wood knots. Apply one coat of stain-blocking primer to area using paintbrush.

Step 6: Protect Doors, Windows and Lights
Cover doors, windows and lighting fixtures using plastic sheeting and painter’s tape.

Step 7: Paint Exterior
Load flat or satin sheen exterior paint color into paint sprayer. Depending on intensity of hue, apply one or two coats of exterior paint to entire house. Be sure to work your way from top to bottom in a smooth, controlled manner, overlapping each stroke by 8 inches. TIP: When changing exterior color from light to dark or dark to light, start with a coat of primer to ensure proper coverage. Primer is not necessary when a fresh coat of existing color is being applied.

Step 8: Paint Trim and Doors
Remove plastic sheeting from doors, windows and lighting fixtures. Add two coats of exterior satin or semigloss paint color to woodwork and doors using paintbrush. Remove drop cloths.

There is of course plenty of variations and greater details to consider, but these are the basics.

Leave a Comment